Nolan N40-5 Beltway Sécurité Et Instructions D'utilisation page 20

depending on whether its slider is pulled completely backwards (A). To close the front
air intake, pull the above mentioned slider completely forward (B).
Rear Extractors:
out ensuring an optimum comfort inside the helmet. (Fig. 19).
N-COM - NOLAN COMMUNICATION SYSTEM PRE-SETTING
Your Nolan helmet is factory-preset to be equipped with the N-Com communication
system During the communication system installation (see the specific instructions
contained in the N-Com kit), it will be necessary to remove the foam material fillers
located in the polystyrene cheek pads next to the N-Com earphones seats.
WARNING
- The above-mentioned fillers should only be removed if the helmet is used with an
N-Com compatible system installed.
are integrated in a rear spoiler and allow warm and stale air to flow
20