Installing Table Models; Appliance Connection - Salvis Smartline AKP1 BI371828 Mode D'emploi

9.3

Installing table models

Setup
‒ horizontally and vibration free,
‒ under an extraction hood with flame-retardant filters,
‒ not on heated surfaces,
‒ not on flammable surfaces,
‒ not against flammable walls.
‒ not above heat radiating appliances, for example, above baking oven or heat cabinets.
. Remove protective film from appliance. Remove residual adhesive with cleaner or benzene.
. Use the screw feet and align the appliance horizontally.
. For standalone setup of appliances on narrow tables or base structures: Prevent the appliance
and the table or substructure from tipping over and displacement, e.g. by screwing it to the wall or
ground.
9.3.1

Appliance connection

● Appliances can be connected to one another
using screws (Figure Position 1 and 2).
en
29 / 64