Metabo HPT DH 28PC Mode D'emploi Et Instructions De Securite page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7. Bolt placing operation with Chemical Anchor. (Hammering only)
Standard socket
(on the market )
8. Drilling holes and driving screws (Rotation only)
Drill chuck, chuck adaptor and chuck wrench
Special screw
Code No. 981122
9. Driving Screws (Rotation only)
Phillips Driver Bit
Bit No.
No.2
1/8" – 3/16" (3 – 5 mm)
No.3
1/4" – 5/16" (6 – 8 mm)
10. Dust cup, Dust collector (B)
Dust cup
Code No. 971787
11. Hammer grease A
1.1 lbs (500 g) (in a can) Code No. 980927
0.15 lbs (70 g) (in a green tube) Code No. 308471
0.07 lbs (30 g) (in a green tube) Code No. 981840
NOTE:
Specifications are subject to change without any obligation on the part of the metabo HPT.
(SDS-plus shank)
1/2" (12.7 mm) Chemical
Anchor Adapter
(Code No.303044)
3/4" (19 mm) Chemical
Anchor Adapter
(Code No. 303045)
Drill chuck (13VLRB–D)
(includes chuck wrench)
Code No. 321814
Chuck wrench
Chuck adaptor (D)
Bit No.
(SDS-plus shank)
Code No. 303624
Screw Size
Dust collector (B)
Code No. 306885
Chuck adaptor G
(SDS-plus shank)
Code No. 303623
Length
1" (25 mm)
1" (25 mm)
English
Code No.
971511Z
971512Z
21

Publicité

Table des Matières
loading

Table des Matières