Birthing Bed Positioning; Delivery Table Positioning; Trendelenburg Positioning; Pelvic Tilt - Stryker 4701 Manuel D'utilisation

WARNING
Prior to placing weight on the foot section, verify the locking bar has been lowered and locked. The foot sec-
tion locking bar is not designed for use as a grasping bar or other patient assist device.

BIRTHING BED POSITIONING

S
Position the patient's feet in the foot rests.
S
Raise or lower the foot rests to a position comfortable for the patient.
S
Remove the foot section and tuck the drape into the fluid basin.
S
Raise the bed to a comfortable height by pressing the "Bed−Up" control on the siderail and position the
patient's perineum out and over the edge of the seat section.

DELIVERY TABLE POSITIONING

S
Slide the patient down to the perineal edge.
S
Lower the foot section to its lowest position.
S
Position the attached calf supports and place the patient's legs in the supports.

TRENDELENBURG POSITIONING

Lower the Fowler (back section) by pressing the control on the siderail or by squeezing the CPR lever. Press
the Trendelenburg button on the siderail or the control pendant to lower the head end of the bed to the desired
angle.

PELVIC TILT

Use the Trendelenburg button on the siderail or the control pendant to provide additional pelvic tilt and comfort
for the patient when the Fowler (back section) is raised.
Bed Operation
1−21