Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
AVENTICS | ED05 | R414010201–BAL–001–AA | English
English
1
About this Documentation
Documentation validity
This documentation applies in principal to all pressure
regulators of the series ED05 Rail and thus for the
following product numbers. If your product number is not
listed in the following table, the deviating information of
the offer drawing applies.
Product
Supply
number
pres-
sure
R414009090 11 bar
R414009091 11 bar
R414009092 11 bar
R414009093 11 bar
R414009094 11 bar
R414009095 11 bar
R414010527 11 bar
R414010528 11 bar
This documentation is intended for installers, operators,
and system owners.
It contains important information on the safe and
appropriate assembly, operation, and maintenance of the
ED05 pressure regulator and how to remedy simple
malfunctions yourself.
Required documentation
The ED05 pressure regulator is a system component.
The instructions for the other system components and
system documentation must therefore be observed.
Output
Set point Actual
pressure
0 ... 10 bar 0 ... 10 V
0 ... 10 bar 4 ... 20 mA 4 ... 20 mA
0 ... 5 bar
0 ... 10 V
0 ... 5 bar
4 ... 20 mA 4 ... 20 mA
0 ... 3.5 bar 0 ... 10 V
0 ... 3.5 bar 4 ... 20 mA 4 ... 20 mA
0 ... 6 bar 0 ... 10 V
0 ... 6 bar 4 ... 20 mA 4 ... 20 mA
Presentation of information
Warnings
In this documentation, there are warnings before the steps
whenever there is a risk of personal injury or damage to
equipment. The measures described to avoid these
hazards must be followed.
Safety instructions are set out as follows:
Hazard type and source
Consequences
O Precautions
value
Explanations of safety warnings
0 ... 10 V
0 ... 10 V
Indicates a hazardous situation which, if not avoided,
will certainly result in death or serious injury.
0 ... 10 V
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
0 ... 10 V
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injuries.
Indicates that damage may be inflicted on the product
or the environment.
Abbreviations
This documentation uses the following abbreviations:
Abbreviations Meaning
ED05
DC
SIGNAL WORD
DANGER
WARNING
CAUTION
NOTICE
E = Electropneumatic pressure
regulator,
D = Directly controlled
05 = Nominal width 5
Direct current
13
Publicité
Table des Matières
