Télécharger Imprimer la page

Jenn-Air JJW9830DDP Guide D'utilisation Et D'entretien page 26

Masquer les pouces Voir aussi pour JJW9830DDP:

Publicité

Les langues disponibles

Les langues disponibles

C
& C
ARE
To Delay a Self-Clean Cycle:
1. Select Clean using the Options knob.
2. "Remove racks from oven" will be displayed. Remove the
racks.
3. Select Continue using the Quickset pads or the Options
knob.
4. Using the Quickset pads or the Options knob,
Select Light for a lightly soiled oven and two hours of
cleaning time
OR
Select Medium for medium soiled oven and three hours of
cleaning time
OR
Select Heavy for a heavily soiled oven and four hours of
cleaning time.
5. The selected cleaning time and approximate unlocking
time will be displayed.
6. After five seconds, Options will be displayed. Select
Options using the Quickset pads or the Options knob.
7. Select Delay using the Quickset pads or the Options knob.
8. Select the number of hours you want to delay the start of
the self-clean cycle from the displayed times using the
Quickset pads or the Options knob.
OR
Select the desired delay time using the Set knob. The cycle
can be delayed up to nine hours.
9. The delay time and cleaning time will be displayed.
LEANING
25
After Self-Cleaning
About one hour after the end of the clean cycle, the lock
will disengage and "Oven Cooling" will turn off in the
display. At this point, the door can be opened.
Some soil may leave a light gray, powdery ash which can be
removed with a damp cloth. If soil remains, it indicates that
the clean cycle was not long enough. The soil will be removed
during the next clean cycle.
If the oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and embossed rack
supports with a small amount of vegetable oil to restore ease
of movement.
A white discoloration may appear after cleaning if acidic or
sugary foods were not wiped up before the clean cycle. This is
normal and will NOT affect performance.
Notes:
• If the oven door is left open, "Please Close Door" will
flash in the display until the door is closed.
• If more than 30 seconds elapse between pressing the
Clean pad and pressing a number pad, the program will
automatically return to the previous display.
• The oven door will be damaged if the oven door is forced
to open during cleaning or cooling process.
• The first few times the oven is cleaned, some smoke and
odor may be detected. This is normal and will lessen or
disappear with use. If the oven is heavily soiled, or if the
broiler pan was accidently left in the oven, excessive
smoke and odor may occur.
• As the oven heats and cools, you may hear sounds of
metal parts expanding and contracting. This is normal
and will not damage your appliance.

Publicité

loading