Fold Stroller - Quinny Zapp 01474C Mode D'emploi

To Use
13

Fold Stroller

NOTE: It is not
necessary to remove
canopy before folding.
Close canopy (Figure
13).
Stand behind the
stroller and push release
button 1 (Figure 13a).
The button will stay
pressed by itself.
Push release button 2
while at the same time
pushing the upper frame
forward (Figure 13b).
Ensure that the handle
crossbar is folded inward
(Figure 13c).
13
13a
13b
13c
Hold onto stroller by hinge
point. Apply parking brake.
1. Press down release pedal.
2. Pull rear hinge
rearward slightly.
3. Then push rear hinge
forward to fold stroller
(Figure 13d).
If necessary, push down
further on the frame with
your hands to make it
more compact. Place it
inside transport bag
(Figure 13e). Front wheels
go toward the carry strap.
NOTE: To make the
stroller more compact, you
may remove the wheels.
14
Removing the
Wheels
Press the release button
and pull the rear wheel
out of the frame
(Figure 14).
Press the release button
on the bottom of each
front wheel and pull
wheel off of the frame
(Figure 14a).
8
TM
13d
13e
14
14a