WHAT TO DO IN CASE OF A PROBLEM
The hob or the cooking zone doesn't start-up:
• The hob is badly connected on the electrical network.
• The protection fuse cut-off
• The looking function is activated
• The sensitive keys are covered of grease or water.
• An object is put on a key.
The symbol [ F ] displays :
• You cannot use this cooking zone anymore.
• Call the After-sales Service.
The symbol [ E ] displays :
• The electronic system is defective.
• Disconnect and replug the hob.
• Call the After-sales Service.
One or all cooking zones cut-off:
• The safety system functioned
• You forgot to cut-off the cooking zone for a long time.
• One or more sentive keys are covered.
• The pan is empty and its bottom overheated.
The automatic cooking system « go and stop » doesn't start-up:
• The cooking zone is still hot [ H ]
• The highest power level is set [ 9 ]
• The cooking level was engaged with [ - ]
The control panel displays [L]:
• Refer to the chapter control panel locking.
The control panel displays [ Er03 ] :
• An object or liquid covers the control keys. The symbol disappear as soon as the key is
released or cleaned.
The control panel displays [ ER21 ] :
• The hob is overheated, let it cool and then turnit on again.
The control panel displays [ U400 ], [ Er25 ]or [ U4 ] :
• The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, call the SAV.
ENVIRONMENT PROTECTION
• The packaging material is ecological and can be recycled.
• The worn appliances contain certain noble metals. Apply to the local government about the
possibilities of recycling.
• Don't throw your appliance with the household
refuses
• Get in touch with the waste collection center of
your commune that is adapted to the recycling
of the household appliances.
24