_PP1000_PP2000.book Seite 38 Dienstag, 6. April 2010 4:31 16
Cleaning and caring for the inverter
9.1
Using the inverter without remote control
➤ Set the main switch (fig. 2 1, page 3) to
– "ON" to switch the inverter on
– "OFF" to switch the inverter off
✓ LED "POWER" lights up when the inverter is switched on.
9.2
Using the inverter with a remote control
Note
I
Refer to the operating instructions of the remote control which are
also included in the scope of delivery.
➤ Set the main switch (fig. 2 1, page 3) to "Remote".
➤ Switch the inverter on or off using
– the buttons on the remote control or
– the external switch
✓ LED "POWER" lights up when the inverter is switched on.
10
Cleaning and caring for the inverter
Caution
a
Do not use sharp or hard objects or cleaning agents for cleaning as
these may damage the device.
➤ Occasionally clean the device with a damp cloth.
38
PerfectPower