Carburettor Control Link Adjustment; Propeller - Yamaha Motor 20C Manuel D'entretien

GEN
SRVC PERIODIC SERVICE
D31906-0

CARBURETTOR CONTROL LINK ADJUSTMENT

1) Loosen the carburetor control ling set-crew.
2) Set the magneto control lever in the fully
advanced position, and adjust the guide collar
so that it is in the specified position (as shown)
of the accelerator cam.
3) After adjustment, tighten the screw.
4) While holding down the control ring, tighten the
set-screw.
D34900-0

PROPELLER

1) Check the blades for wear, damage and cavita-
tion erosion.
2) Check the splines for wear and damage.
3-13
E