Gear Oil Level; Operation Of Controls And Moving Parts - Yamaha Motor 20C Manuel D'entretien

GEN
SRVC PREDELIVERY SERVICE
D23000-0

GEAR OIL LEVEL

Remove the oil-drain and oil-level plugs, and add
the gear oil through the oil-drain hole until it over-
flows from the oil-level hole. Re-fit the plugs. (The oil
level plug first.)
D23502-0
OPERATION OF CONTROLS AND MOVING
PARTS
1. Check for correct operation of the shift control.
2. Check for correct operation of the tilt-lock
mechanism.
3. Check for smooth operation of the steering con-
trol.
4. Check for smooth operation of the throttle con-
trol.
5. Check for correct operation of the spark
advancer.
6. Check for correct operation of the choke sys-
tem.
7. Noting the following WARNING and CAUTION,
check for correct operation of the starting sys-
tem.
w
Before attempting to check the starter system,
replace the propeller, and make the tests with
the motor placed in a test tank.
cC
Use a 50 : 1 petrol-oil mixture to start the
engine.
8. Check for correct operation of the engine stop
system.
3-4
E