GESTRA BK35A/7 Instructions De Montage Et De Mise En Service page 24

Installation
1
Steam trap unit
1. Clean seating surfaces.
2. Clean strainer
3. Use hexagon screws
trap unit to the connector.
2
Steam trap unit with GESTRA UNIVERSAL conncector
1. Clean seating surfaces.
2. Clean strainer
3. Install GESTRA UNIVERSAL connector in pipeline.
4. Use new hexagon screws
3
GESTRA UNIVERSAL connector
1. Install GESTRA UNIVERSAL connector in pipeline.
2. Clean seating surfaces.
(if mounted).
B
of the existing connector to attach the
A
(if mounted).
B
to fix the trap unit.
A
/