Seiki SE42UMT Manuel D'utilisation page 27

Lines or streaks in
‡ &KHFN DQWHQQD FKDQJH WKH SRVLWLRQ RI WKH DQWHQQD
pictures
No pictures when
‡ Check if the input source is HDMI1/HDMI2/HDMI3.
connecting HDMI
Pictures appear in wrong
‡ Adjust the Aspect Ratio settings in the Setup menu or press the ASPECT button on the remote control.
ratio
The audio function does not work
‡ Press the VOL +/- buttons.
Picture OK but no sound ‡ Sound muted? Press the MUTE button.
‡ Try another channel. The problem may be caused by the broadcaster.
No output from one of the
‡ Adjust the Balance settings in the Audio menu.
speakers
Unusual sound from ‡ A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and
inside the TV
No sound when
‡ Check if the input source is HDMI1/HDMI2/HDMI3.
connecting HDMI
Audio noise ‡ Keep the RF coaxial cable away from the other connected cables.
Password
‡ Select the SET Password setting in the Lock menu, then enter the following master password "8899". The master
Lost password
There is a problem in PC mode
The signal is out of range
‡ Adjust the resolution, horizontal frequency, or vertical frequency.
LQYDOLG IRUPDW
Vertical bar or stripe on
background & Horizontal ‡ 8VH $XWR FRQ¿JXUHV RU DGMXVW FORFN SKDVH RU +9 SRVLWLRQ
Noise & Incorrect position
Screen color is unstable ‡ Check the signal cable.
or show a single color ‡ Reinstall the PC video card.
does not indicate a fault with the TV.
password clears your previous password and allows you to enter a new password.
TROUBLESHOOTING
-
En 26