Blaupunkt BLP4605-001 Mode D'emploi page 12

Turn off
Method one: Suck the two separated earpieces; the headset will be turned off.
Method two: Hold the start/end call button for 3 seconds, until closed. In this way, make sure that
the two earpieces are separating.
Wireless connection to a Bluetooth device
1. Open the headset, it will automatically enter the pairing mode when the alternating red and
blue and you will hear "Bluetooth ready to pair".
2. On your smartphone, go to the Bluetooth menu, go to the list of available Bluetooth devices
and select BLP4605. The connection will happen, then the LED will slowly flash blue. The first
connection can take up to several minutes.
Handsfree function
In Bluetooth mode, you can also use the headphone as a hands free kit.
1. Make a call: Call your correspondent with your phone and talk close to the speaker.
2. Accept a call / End a call: Short press on answer/end button.
3. Deny a call: Long press on start/end call button on the headset.
4. Dial the last incoming or out coming number: Press twice on start/end call button on the
headset.
The following controls are available
1. Short press the volume + key to next song.
2. Short press the volume - key to the previous song.
3. Long press the volume + key to increase the volume.
4. Long press the volume - key to reduce the volume.
Declaration of conformity UE
Dag Technologie®, herby declares that this equipment, conforms to the essential requirements
and other relevant provisions of Directive 2014/53/UE. The declaration of Conformity can be
viewed at the following address:
http://www.mms-support.net/OTA/ECD_DAG_BLP4605-001.pdf
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the impact on human health