Options; Before First Use - AEG FEE63600PM Notice D'utilisation

Masquer les pouces Voir aussi pour FEE63600PM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

38
www.aeg.com

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
The Option button toggles
between the available
options and their possible
combinations.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
7.1 XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than
automatically activated in next cycles.
This configuration can be changed at any
time.
Every time
activated, XtraDry is off and
needs to be chosen
manually.

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
Activating XtraDry deactivates TimeSaver
and vice versa.
How to activate XtraDry
Press Option until the indicator
The display shows the updated
programme duration.
7.2 TimeSaver
The TimeSaver allows to reduce the
duration of a selected programme by
approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with
XtraDry.
How to activate TimeSaver
Press Option until the indicator
The display shows the updated
programme duration.
7.3 ExtraHygiene
This option provides better hygiene
results by keeping the temperature at 70
°C for at least 10 minutes during the last
rinsing phase.
. It is
How to activate ExtraHygiene
Press Option until the indicator
The display shows the updated
is
programme duration.
is on.
is on.
is on.

Publicité

Table des Matières
loading

Table des Matières