General Safety Instructions; Intended Use - Dometic MasterFlush 8100 Série Mode D'emploi

General safety instructions

Caution! Hazard of Flooding
If the toilet uses fresh water for flushing and is connected directly or indirectly to a shore-
side municipal water system at ANY time, shoreside water connections MUST be discon-
nected if the boat is unattended (even if boat is unattended for a brief period) . Failure to do
so can result in flooding which can cause loss of property and life .
Caution! Hazard of Flooding
Before beginning any work on this product, be sure that all electrical power to the unit has
been turned off and that seacocks are in the CLOSED or OFF position . Failure to do so can
result in flooding which can cause loss of property and life .
Caution!
Overfilling the holding tank can create serious damage to the sanitation system, such as
rupturing the holding tank and releasing tank contents into the bilge . To prevent this pos-
sibility, Dometic recommends using the "full" tank shut-down relay in the toilet's electronic
control module . The "full" signal from the holding tank can be generated by an optional
Dometic DTM01C tank monitor or DTM04 four-level tank monitor system .
3

Intended use

The Dometic 8100 series MasterFlush toilet provides an electric-flush toilet that macerates waste
and pumps it to a holding tank or other effluent storage/disposal system . Operated by a wall-
mounted flush switch, the toilet allows the user to add water to the bowl (before or after flushing)
and to flush the toilet by pushing a button .
3.1 Benefits
Convenient electronic flush. Add water or flush with the touch of a button .
Choice of two water consumption settings. "Normal" flush adds water to bowl while button is pushed;
"Dry Bowl" does not use water during a flush – it only operates the macerator pump .
Versatile installation. Powerful macerator pump allows toilet to be located up to 98 ft . (30 m) away or
9 .8 ft . (3 m) below holding tank or other discharge line destination .
Automatic "full tank" shut-down (Optional installation - tank level monitor and shut-down relay
required. Available separately). When connected to a holding tank level indication system, the 8100
series toilet system will shut off electrical power to the toilet when the holding tank is full . This safety
feature prevents overfilling the holding tank, which may cause damage to the boat .
4
Dometic 8100 Series MasterFlush Toilet