Commissioning - Titan TA750 Notice D'instructions

6.

Commissioning

Never operate the TA750 without plastic strap. Transport wheel, welding device
and the cutter could get damaged.
The operation of the TA750 requires sufficiently charged Li-Ion storage battery. When the
tool was delivered you received a partially charged Li-Ion battery. Please charge the Li-Ion
battery before first use. (see section 7.7).
To start operations of the TA750 plug the Li-Ion
battery into the slot provided till the stop is reached.
To enable the tool please press push-button 1 for a
short moment. The LED signal lamp flashes. The
TA750 is ready for operation.
LED signal lamp
Stand – by mode
Flashes
is bright Tool in operation
TA750
(0001)
H TA750 EU 46/17
Push-button 1
40 / 98