LENCO BMC-060 Mode D'emploi page 12

You can also connect the microphone with an external active speaker or Hi-fi
system with Line in function. Then you can hear the sound of the microphone
on the external speaker or Hi-fi system.
Noted: The 3.5mm aux cable is not included.
Troubleshooting
The power light is not ON
The microphone has no sound.
The microphone has no echo.
The sound has noise.
⚫ Name: Portable Wireless Microphone Bluetooth Speaker with LED
⚫ Item NO.: BMC-060
⚫ Input: DC5V; 500mA
⚫ Output Power: 5W*1 + 1 x passive radiator
⚫ Bluetooth version: V5.0
⚫ Wireless frequency: 2402-2480MHz
Please check the Type-C cable and
charge it.
Please power on and adjust the volume
to big.
Please slide the echo to big, please do
not put the speaker on the table under
echo opening condition.
Please confirm whether there is
environmental interference.
12