Parts List - Triton ETA300 Instructions D'utilisation Et Consignes De Sécurité

Thank you for purchasing this Triton product. These instructions contain information necessary
Please read this manual to make sure you get the full benefit of its unique design.
Keep this manual close to hand and ensure all users of this product have read and fully understand the instructions.
CONTENTS
Symbols

Parts list

Safety
Assembly
Warranty
SYMBOLS
Always wear ear, eye and respiratory
protection.
Conforms to relevant legislation
and safety standards.
PARTS LIST
Table Assembly
1. Long Extrusion (2)
2. Short Extrusion Assembly (2)
3. Scale (2)
4. Brace (2)
5. Corner Bracket (4)
6. Inner Bearing (smaller) (2)
7. Outer Bearing (larger) (2)
8. Fence Assembly (1)
Fastener Bag 1
9. Brace Bracket (4)
10. Flange Nut M6 (14)
11. Hex Bolt M6 x 10 (20)
GB
12. Hex Nut M6 (8)
13. Washer M6 (20)
14. Screw M6x16 (4)
15. Fence Clamp Assembly (2)
Contents / Symbols / Parts List
2
for safe and effective operation of this product.
2
2
5
6
11
Outer Track Assembly
16. Outer Track (1)
17. Leg (2)
18. Foot (2)
19. Leg Plate (4)
20. Leg Clamp Assembly (2)
Fastener Bag 2
21. Hex Bolt M6 x 40 (6)
22. Nyloc Nut M6 (6)
23. Screw M4 x 10 (4)
24. Square Nut M4 (4)
25. Height Stop (2)
26. Coach Bolt M6 x 20 (2)
27. Round Knob with Nut (2)
28. Angled Tube Closer (2)
29. Flat Tube Closer (4)
Instruction warning.
Do not use before viewing and
understanding the full operating
instructions
Inner Track Assembly
30. Inner Track (1)
31. Support Bracket (2)
32. Skid Assembly (2)
33. Front Panel Bracket (1)
34. Rear Panel Bracket (1)
Fastener Bag 3
10. Flange Nut M6 (2)
13. Washer M6 (4)
22. Nyloc Nut M6 (6)
26. Coach Bolt M6 x 20 (2)
27. Round Knob with nut (2)
35. Coach Bolt M6 x 12 (4)
36. Locking Latch (2)
37. Hex Bolt M6 x 45 (2)
38. Screw M6 x 10 (2)