Optional Accessories; Cleaning The Filter - Makita DCW180 Manuel D'instruction

MAINTENANCE
CAUTION:
Always be sure that the appliance
is switched off, unplugged, and the battery car-
tridge is removed before attempting to perform
inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Cleaning
• Clean the oil stain in the chamber regularly.
• Clean around the interior of the chamber to pre-
vent odor.
• Clean the dust on the filter regularly to improve the
refrigeration efficiency.
• The sealing strip of the upper cover is easy to get
dirty, clean it in time.
Defrosting
To defrost, turn off the power and wait until the frost has
melted. Then wipe off the water.

Cleaning the filter

1. Push the slide cover in the direction of the arrow
shown in the figure, and then take the filter cover
off.
► Fig.9
2. Take off the filter, clean the filter, and then install
the filter back in the filter cover.
3. Install the filter cover back.
► Fig.10
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
12 ENGLISH