Elkay EZTL Série Manuel D'installation Et Utilisation page 5

EZFSTL8*1H, 2H
Versatile Wrapper and Trim Kit Installation Instructions
Left Hand Wrapper
(High Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Screw trim piece to wrapper
with (2) screws
(provided)
3) Re-install wrapper
with (4) screws.
4) Dispose of unused
cover plate.
Left Hand Wrapper
(Low Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Clip cover plate, sliding
until plate sits flush with
the wall.
3) Re-install
wrapper with
(4) screws.
4) Dispose of
unused trim
piece.
LZFSTL8*1H, 2H EZFSDTL*1H
Wrapper Fill
Piece Location
(Left Side High)
Right Hand Wrapper
(High Side)
1) Remove existing wrapper
2) Screw trim piece to wrapper
3) Re-install wrapper with (4) screws.
4) Dispose of unused cover plate.
PAGE 5
WWW.RESTROOMDIRECT.COM
LZFSDTL*1H
Right Hand Wrapper
(Low Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Clip cover plate, sliding
until plate sits flush with
the wall.
3) Re-install
wrapper with
(4) screws.
4) Dispose of
unused trim
piece.
by removing the (4) screws
from bottom.
with (2) screws
(provided)
704 • 937• 2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115
Wrapper Fill
Piece Location
(Right Side High)
1000003116 (Rev. C - 01/19)