Important - OK. OLE 396 B-D4 Guide D'utilisation

Important:

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Remove batteries
when the remote control is not to be used for a long time. Batteries left in equipment may cause
damage through deterioration and corrosive leakage, invalidating the guarantee.
To protect the environment use local recycling facilities for battery disposal. Dispose of used batteries
according to the instructions.
CAUTION: Risk of explosion if batteries are replaced by an incorrect type. Replace only with the same
or equivalent type recommended by the equipment manufacturer.
If the batteries in your remote control are run down, you can use the buttons on your TV set. In TV
mode, they have the same functions as the corresponding buttons on the remote control. The OK
button on the TV set can be pressed repeatedly to select the required source. In the menus they have
the following functions:
For models with OK button on the set:
PR+ or PR ▲
PR- or PR ▼
VOL+, + or VOL ►
VOL-, - or VOL ◄
MENU or
OK
Switch the TV on and off
1. When the power cord is connected, the TV will be turned on directly or be in standby mode. If the
TV is in standby mode, press the
control to turn it on.
2. To put the TV into standby mode, press the
the remote control. The TV set remains powered up, but with low energy consumption.
3. To switch off the TV, unplug the mains socket from the mains outlet.
(*On certain models, you have to turn on the power switch first.)
▲
▼
►
◄
Menu
OK
or POWER/
or POWER/
EN 7
For models without OK button on the set:
PR+ or PR ▲
PR- or PR ▼
VOL+, + or VOL ►
VOL-, - or VOL ◄
MENU or
button on the set or the
button on the set or the
Getting started
►
◄ & OK
▲
▼
Menu
button on the remote
button on