Operation Diagram - Hardi FILLER 25 Instructions D'utilisation

HARDI FILLER
GB
Description
The HARDI FILLER ensures a safe and efficient method of handling
both liquid and powder plant protection chemicals. The transfer of
chemical from the hopper to the sprayer tank takes place through an
injector/venturi which is located near the bottom valve.
The HARDI FILLER is available in two models:
Model 25, consists of a 25 l polyethylene filling tank with lid, built-in
rinsing device fitted on the inside of the tank and operating valves.
Optional extras: Rinsing equipment for liquid container and bags/
packets of the plant protection chemicals. For assembly see page 15.
Model 35, consists of a 35 l polyethylene filling tank with lid, built-in
rinsing device on the inside of the tank and the operating valves.
Furthermore, rinsing equipment for liquid container and bags/packets
of plant protection chemicals is standard on the model 35.

Operation diagram

1. Suction filter
2. Pump
3. 3-way valve between pump and operating unit
4. On/off valve for wash down ring
5. On/off valve for rinsing device
6. On/off valve for emptying hopper
7. Filler hose to spray tank
8. Self-cleaning filter (if fitted)
9. Operating unit
10.Bag holder for washing down of bag package
11.Suction MANIFOLD SYSTEM
12.Pressure MANIFOLD SYSTEM
4