HumanTechnik lisa Mode D'emploi page 59

Fastening by means of a Humantechnik adhesive pad:
Only the original adhesive pad should be used for installation by means
of an adhesive pad. This has to be ordered separately.
The small given self-adhesive area is not intended for fastening
the combined detector!
Surfaces on which the adhesive pad is to be mounted have to be smooth,
even, undamaged, clean and free of dust, grease and solvents. The
adhesive pad must not be used on porous surfaces, e.g. plaster, emul-
EN
sion paint, plywood, chipboards and hardboards, chalky or loose paint
layers, crumbling plaster or dirty surfaces.
Adhesive pads may leave residues after disassembly! The use of the
adhesive pad is always at the user's own risk. When using the adhesi-
ve pad, please pay attention to its mounting instructions.
59