3M Filtrete FAP-SC02L Série Manuel D'utilisation page 14

Air Purifier Will Not Turn On
• Be sure the air purifier is properly plugged into a 120V AC outlet.
• Check if a fuse has blown or if a circuit breaker has been tripped. First check
both the home's fuses and/or circuit breakers, then check the fuse in the air
purifier's power cord. If a circuit breaker has tripped or a fuse has blown, first try
to determine the root cause for the fault condition and correct the fault condition
before resetting circuit breakers or replacing fuses. If no fault can be found, try
replacing the fuse in the air purifier's power cord. If the fuse blows a second time,
discard the air purifier.
Decreased Air Flow
• Make sure that any packaging materials have been removed from the filter.
• Check the air purifier to make sure the air inlet and filtered air outlet are
not blocked.
• Check the condition of the filter and if dirty, replace with a new Filtrete™
Air Purifier Filter.
Noisy Operation
• Check the condition of the filter and if dirty, replace with a new Filtrete™
Air Purifier Filter.
• Make sure that nothing is blocking the air inlet or filtered air outlet.
• Operate the purifier on a lower fan speed.
Still having trouble? Please call 1-800-388-3458 from the United States
or Canada.
Supplier's Declaration of Conformity for the following 3M Company
manufactured product(s):
Trade Name: Filtrete™ Smart Air Purifier
Model(s): FAP-SC02L, FAP-ST02L
We hereby declare that this product(s) complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
Responsible Party – US Contact information:
3M Company
3M Center, Building 223-4S-02
Saint Paul, MN 55144-1000
Phone: 1-800-388-3458
Internet contact information: www.filtrete.com
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
14