LENCO PIR-510 Mode D'emploi page 23

FM Radio
Select 'FM mode' from the main menu by using the navigation wheel or press the navigation wheel
to enter the FM radio mode. The FM mode will start on 87.5MHz.
To save all stations with strong signal, press the navigation wheel, it will show "auto scan?" choose
YES. Then it will start auto scan. Once the auto-scan is complete, stations will be saved in your
favorites.
You will then be able to browse through these saved stations by holding down the '<' or '>' buttons
to skip between saved stations.
To manually scroll through FM frequency, simply press the '<' or '>' buttons to go backwards or
forwards through the frequency wave.
Pre-setting your favourite FM stations
To save presets manually, select and listen to the station frequency number for the station you wish
to save.
Press and hold the "FAV" button on the front panel for 1-2 secs and the number '01' will display on
the screen. Use the navigation knob to browse through preset numbers (up to 99) and select the
chosen preset number you wish to save it as by pressing the navigation wheel.
Recalling preset FM stations
View your favourite FM stations when you are on FM mode by simply short press the 'FAV' button
on the front panel and begin scrolling through the saved stations.
Use the „<" and „>" keys for searching radio stations. Use the right rotation knob or the „<" und
„>" keys for searching radio stations manually. One keypress is equal to 0,05MHz.
Press the scan button, the radio will now begin to scan for all of the available digital radio stations.
Once the scanning process has completed the radio will tune to the first available radio station.
23