LENCO PIR-510 Mode D'emploi page 20

DAB/FM Setup
Local Radio Setup
Playback Setup
Device
Menu
Equalizer
Resume When Power On
Software Update
Reset to Default
DLNA/UPnP
You may change the default DLNA name as you like.The information below is the introduction of
how to setup media streaming from PC or other media server.Study the own instruction of the
software or apps you use to enjoy music streaming if necessary. Make sure the music files are in the
format of MP3, WMA, WAV or AAC for music streaming to the radio.
⚫
FM Mode: Set Mono or Set Stereo
⚫
FM Threshold
Seek Threshold: Strong, Default or Weak
Stereo Threshold: Strong, Default or Weak
⚫
DAB Threshold: Strong, Default or Weak
⚫
Service following(FM-IR): Enable or Disable
⚫
Service following(DAB-IR): Enable or Disable
There is a shortcut Local Radio from the Internet Radio menu so that you can
easily go to the station list of your location.You can setup your location
manually or let the system detect your current location. If you choose to
automatically detect your location, the system will detect the location
according to the IP address of your connected network. Press Local Station to
enter the local radio station list directly.
Select the play mode of the media center. You can select: Off (no repeat or
shuffle), Repeat all, Repeat one, or Shuffle.
The PIR-510 default device name for DLNA is "AirMusic". You may rename it
for DLNA setup on the PC or mobile. Use the QR code for download and
install the "AirMusic" control App.
You can select "Local Radio, my mediaU, Internet Radio, Sleep Radio, USB,
UPnP, Media Center, FM, DAB/DAB+, Spotify Connect, Information Center,
Timer, Alarm" playing mode.
The default equalizer setting is "normal", but you may change it to "Flat, Jazz,
Rock, Soundtracks, Classical, Pop, News or my EQ".
The system default setting is to resume the internet radio playback if you
were listening to internet radio or media center before switching off the
unit.If you turn this option off, the system will return to the main menu when
switching on the unit again.
If there is a software update on the server, the system will notify you. Before
starting a software upgrade, ensure that the unit is plugged into a stable
mains power connection.
Disconnecting the power during a software update may permanently
damage the unit.
Restore to default settings. After the device is reset, the system will show the
language menu. Choose the desired language and press the navigate wheel
20