Space Seating 818-41G9C18P Instructions De Montage

818-41G9C18P / 818-31G9C18P / 818-11G9C18P
FAUTEUIL DE DIRECTION AVEC DOSSIER HAUT
ÉTAPE 1 ÉTAPE 2
13
2
X5
1
10
11
ÉTAPE 4 ÉTAPE 5
13
8
4
12
6
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités des pièces
sont correctes.
ÉTAPE 1 Insérer les cinq roulettes (2) dans la Base (1). Pousser fermement jusqu'à ce que les roulettes (2) s'encliquettent.
ÉTAPE 2 Fixez les bras (7L et 7R) au coussin du siège (5) avec trois rondelles plates (11) et trois vis de bras (10) pour chaque bras (7). SERREZ TOUTES
LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 3 Fixer le mécanisme (4) à coussin de siège (5) avec la flèche vers l'avant de la chaise avec quatre rondelles plates (11) et quatre vis de
mécanisme (9). SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 4 Fixer le support du dossier (12) à l'arrière du mécanisme (4) à l'aide vis de support (8). SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 5 Insérer le vérin pneumatique (3) dans la base (1), placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
818-41R9C18R / 818-41P9C1A8
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
13
9
10
X3
11
X3
X3
5 11
4
X3
7L
7R
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Roulettes . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3. Vérin pneumatique . . . . . . . . . . . . . . . . . . .1
4. Mécanisme . . . . . . . . . . . . . . . . . . . . . . . . .1
5. Coussin du siège . . . . . . . . . . . . . . . . . . . . .1
6. Dossier . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
7. Bras (7L et 7R) . . . . . . . . . . . . . . . . . . . . . .2
8. Vis de support . . . . . . . . . . . . . . . . . . . . . . .3
9. Vis de mécanism . . . . . . . . . . . . . . . . . . . . .4
10. Vis de bras . . . . . . . . . . . . . . . . . . . . . . . . .6
11. Rondelle plate . . . . . . . . . . . . . . . . . . . . .10
3
12. Support du dossier (préinstallé) . . . . . . . .1
13. Clé Allen (non montré) . . . . . . . . . . . . . . . .1
© Office Star Products décembre 2015
X4
X4
5
1
QTÉ
2
SPACE LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. The 63-37A773HM, 75-7A773, 75-37A773, 75-47A773 and 839-11B35WA are for persons weighing 400 lbs. or less, the 818 & select 829's with self
adjusting mechanism are 300 lbs. or less and the 15-37A720D is 325 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse,
negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover
cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting
from use of this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
All Space chairs meet or exceed ANSI BIFMA standards.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty will be
paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts
Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number
1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
818-41G9C18P / 818-31G9C18P / 818-11G9C18P
818-41R9C18R / 818-41P9C1A8
EXECUTIVE HIGH BACK CHAIR
OPERATING INSTRUCTIONS
FEATURES
• BACKREST LOCKING ADJUSTMENT
Turn knob (1) clockwise to lock backrest in position, to unlock,
turn knob (1) counter-clockwise and lean back to release
anti-kick back mechanism.
• SEAT SLIDER
Lift lever (2) to slide seat, release lever (2) when desired position
is reached.
• TILT TENSION ADJUSTMENT
Turn knob (3) clockwise to increase tilt tension and turn
5
knob (3) counter-clockwise to decrease tilt tension.
• SEAT HEIGHT ADJUSTMENT
To raise seat height, remove pressure from seat and lift
lever (4) up. To lower seat height, sit on chair and
lift lever (4) up.
NOTE: It is normal for chair to slightly lower
under body weight.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (5) in to allow the arms to move
up or down freely. Release button (5) once the desired
height is reached.
WARNING
1. Use this product only one person at a time.
3
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
5. Do not use chair as a stepladder.
4
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.