Technical Characteristics - SCHOLTES HL 997 Manuel D'utilisation

Technical characteristics

Model
Dimensions (mm)
Width
Depth
Height (min./max.)
Ø of exhausting connection
Masse (kg)
Absorption (in watts - 220-240 V ~)
Rated absorption
Motor absorption
Lighting absorption (Halogen lamp)
Metal grease filter
Aspiration area (in cm
* With external 4-speed Scholtés motor
Preliminary information for installation
of the hood
Disconnect the hood during electrical connection, by
turning the home mains switch off.
Expansion wall plugs are provided to secure the hood
to most types of walls/ceilings.
However, a qualified technician must verify suitability
of the materials in accordance with the type of
wall/ceiling. The wall/ceiling must be strong enough to
take the weight of the hood.
Do not tile, grout or silicone this appliance to the wall.
Surface mounting only.
2 )
HL 997 HL 998
898 898
530 530
745/1145 745/1145
150 mm 150 mm
27 28
290 330
250 250
2 x 20 4 x 20
1634 1634
Do not fix chimney flue to furniture or fly over shelves
unless the chimney flue can be easily removed, in
case maintenance is ever required.
Where foreseen remove the grease collecting panels.
Remove the grease filter/s
Do not tile, grout or silicone this appliance to the wall.
Surface mounting only.
Do not fix chimney flue to furniture or fly over shelves
unless the chimney flue can be easily removed, in
case maintenance is ever required.
GB
HLS 998
898
530
745/1145
150 mm
23
290*
210*
4 x 20
1634
13