Power Cord And Grounding Instructions; Safety Tether Key - Tunturi GO 10 Mode D'emploi

Attach the side caps (B) with screws (F)
at the bottom of the upright, and tighten
them well.
POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord
into the treadmill at the left front corner.
Before connecting the device to a power
source, make sure that local voltage
matches that indicated on the type plate.
The treadmill operates at 110 V or 230 V.
This treadmill must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for electrical current to reduce
the risk of electrical shock.
O W N E R ' S M A N U A L
This product is equipped with a cord
having an equipment-grounded
conductor and a grounding plug. The
plug must be plugged into an appropriate
outlet that is properly installed and
grounded in accordance with all local
codes and ordinances. Do not use
extension cables when connecting the
equipment to the power source.
DANGER!
Improper connection of the equipment
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or serviceman, if you are
in doubt as to whether the product is
properly grounded. Do not modify the
plug provided with the product - if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.

SAFETY TETHER KEY

The treadmill cannot be used if the
tether key is not properly installed on the
console; if the key is removed from its
place, the treadmill will immediately stop.
Place the safety tether key in its place on
the console. Ensure that the clip of the
safety tether key is properly attached to
your clothing; as the cord tightens, make
sure the clip does not detach itself from
your clothing before the safety tether key
disconnects from the console.
GB
•
G O R U N 1 0
5