Makita DLM380 Manuel D'instruction page 8

Masquer les pouces Voir aussi pour DLM380:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

NOTE:
Install the upper handle so that the direction of the
upper handle and the power supply cord are
positioned as shown in the figure.
Removing or installing the blade
WARNING:
Always remove the lock key and battery cartridge
when removing or installing the blade. Failure to
remove the lock key and battery cartridge may
cause a serious injury.
The blade coasts for a few seconds after releasing
the switch. Make sure that the blade has come to
a complete stop.
Always wear gloves when handling the blade.
1
3
4
2
014543
1.
Put the mower on its side so that the mowing
height adjusting lever is placed on the upper side.
2.
To lock the blade, insert a lumber or similar into
the mower.
3.
Loosen the bolt counterclockwise with the box wrench.
3
5
014499
4.
Remove the bolt, spring washer, flat washer, and
blade in order.
To install the blade, take the blade removal procedure in
reverse.
WARNING:
Install blade carefully as they have a top/bottom
facing.
Tighten the bolt clockwise firmly to secure the
blade.
Put the blade so that the blade side with a
rotational direction arrow faces outward.
Make sure that the blade is installed securely.
1. Blade
2. Box wrench
3. Loosen
4. Lumber
1. Blade support
2. Blade
1
3. Flat washer
4. Spring washer
5. Bolt
2
4
Installing the grass basket
Remove the lock key.
014545
Raise the rear guard of the mower unit.
1. Groove
2. Hook
3. Grass basket
014544
Hook the grass basket on the groove of the mower unit.
OPERATION
Mowing
WARNING:
Before mowing, clear away sticks and stones from
mowing area. Furthermore, clear away any weeds
from mowing area in advance.
Always wear the safety goggles or safety glasses
with side shields when operating the mower.
Firmly hold the lawn mower handle with both hands
when mowing.
The width between the middle of the front wheels shows
the guideline of the mowing range. For even mowing,
overlap the mowing area partially to the previous
mowed area.
Periodically check the level of the grass basket, and
empty before it becomes full. Before every periodical
check, be sure to stop the mower and remove the lock
key and the battery cartridge.
NOTE:
Using the lawn mower with the grass basket full
prevents smooth blade rotation and places an
extra load on the motor, which may cause
breakdown.
8
2
3
1

Publicité

Table des Matières
loading

Table des Matières