Hornbach 5635827 Manuel D'installation Et De L'utilisateur page 122

Remote control holder 1x
The remote control holder can
be fix at a surface by drilling
two holes.
Slide the holder onto the plastic
support and insert the remote
control.
Inserting the remote control
battery
The battery compartment is lo-
cated on the back of the remote
control. Slide out the battery
support from the remote control
case by pushing the tab. Place
the delivered 3 V CR2032 (Lith-
ium) battery with + (plus pole)
facing upwards into the battery
holder. Insert the battery sup-
port into the remote control.
Extending and retracting the
awning by motor
Point the remote control to the
position of the IR sensor 2 at the
awning.
Press the buttons on the remote
control:
button: extract the awning
button: retract the awning
button: stop the movement of
the awning.
Always watch the awning if you
are extracting or retracting it.
Caution! Do not place any
objects on top of the awning.
Do not touch the moving parts
of the awning during opening
and closing. Do not manually
force the articulated arms closer
together; this will damage the
mechanism.
122 | ENGLISH
7
2
1