Safety Instructions - VOLTCRAFT IRS-350 Notice D'emploi

The temperature in °Celsius is set by membrane buttons and can be controlled through displays of actu-
al temperature and setpoint temperature. The integrated fan allows quick temperature changes of the
calibration area. The setting range is from +50 to +350 °C.
In addition, the device is equipped with an opening at the housing top to calibrate or test contact ther-
mometers with immersion sensors or penetration probes (max. diameter of shaft 3 mm).
The design of this product complies with safety class I. It is only approved for connection to shockproof
sockets with protective grounding and an alternating current of 230 V/AC 50 Hz commonly used in
households.
Operation under adverse environmental conditions is not permitted. Adverse ambient conditions include:
- moistness or high humidity
- dust and combustible gases, vapours or solvents
- storms or stormy conditions, strong electrostatic fields, etc.
Any use other than that described above will damage the product and may involve other risks, such as
short-circuit, fire, electric shock. Do not change or modify any part of the product!
No part of the product must be modified or rebuilt!
The safety instructions must be observed!

Safety instructions

Please read through the operating instructions before using the product for the first
time; they contain important information on proper operation.
The warranty/guarantee is rendered void in cases of damage resulting from failure to
comply with these operating instructions! We assume no liability for any conse-
quential damage!
We do not assume liability for personal injury or material damage resulting from improper use or disre-
garding the safety instructions! In such cases the warranty/guarantee is voided.
This device left the factory in perfect condition in terms of safety engineering.
To maintain this condition and ensure safe operation, you, as the user, must comply with the safety
instructions and warnings contained in these instructions. The following symbols must be observed:
An exclamation mark in a triangle indicates important information in these operating
instructions that has to be observed.
°
This product has been CE-tested and meets the necessary European guidelines.
14