Water Supply Specifications (Auto-Fill Units) - Hatco HWB Série Manuel D'installation Et D'utilisation

English
Electrical Rating Chart — All HWB-11QT Models
Model
HWBXX-11QT
220–230 (CE)†
230–240 (CE)†
HWBXX-11QTDA
220–230 (CE)†
230–240 (CE)†
HWBHXX-11QT
220–230 (CE)†
230–240 (CE)†
HWBHXX-11QTDA
220–230 (CE)†
230–240 (CE)†
The shaded areas contain electrical information for International models only.
‡ Add 3 lbs. (1 kg) to shipping weight for units with a drain.
† CE certification not available on UR models.
NOTE: Shipping weight includes packaging.

Water Supply Specifications (Auto-Fill Units)

Water Pressure 25 psi (172 kPa)
Water Temperature
Form No. HWBM-0518
Voltage Watts
120
208
240
220
240
120
208
240
220
240
120
208
240
220
240
120
208
240
220
240
Minimum Maximum
100 psi (689 kPa)
35°F (2°C) 110°F (43°C)
Amps
500 4.2
536 2.6
600 2.5
2.7
2.5
600
2.7
2.5
515 4.3
551 2.6
615 2.6
2.8
2.6
615
2.8
2.6
800 6.7
715 3.4
800 3.3
3.6
3.3
800
3.6
3.3
815 6.8
730 3.5
815 3.4
3.7
3.4
815
3.7
3.4
Auto-fill units supplied with water from a reverse osmosis
(RO) system (or similiar water filtration system) must be
installed with an operating reminerialization sytem to
ensure proper operation. Failure to do so may cause unit to
overfill. Damage caused by overfilling is not covered under
warranty.
11
SPECIFICATIONS
Shipping Weight ‡
Phase
1 11 lbs. (5 kg)
1 11 lbs. (5 kg)
1 11 lbs. (5 kg)
1 11 lbs. (5 kg)
1 11 lbs. (5 kg)
1 11 lbs. (5 kg)
1 11 lbs. (5 kg)
1 11 lbs. (5 kg)
NOTICE