Safety Information; Items Supplied - Neptun Premium NPTP-E 5000 Mode D'emploi D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Anleitung_NPTP_E_5000_SPK7__ 10.10.13 08:44 Seite 8
GB
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety information with due care. Keep these
operating instructions in a safe place so that the
information is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and the safety information as
well. We cannot accept any liability for damage or
accidents which arise due to a failure to follow these
instructions and the safety information

1. Safety information

Caution!
In stagnant water bodies, garden ponds,
swimming ponds and their surrounding areas
the equipment may only be used with an earth-
leakage circuit breaker with an actuating rated
current of up to 30 mA (according to VDE 0100
Part 702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any kind
or other bodies of water in which people or
animals may be present during operation. It is
prohibited to operate the equipment if a person
or animal is in the danger area. Ask your
electrician!
This equipment can be used by
children of 8 years and older and by
people with limited physical,
sensory or mental capacities or
those with no experience and
knowledge if they are supervised or
have received instruction in how to
use the equipment safely and
understand the dangers which
result from such use. Children are
not allowed to play with the
equipment. Unless supervised,
children are not allowed to clean
the equipment and carry out user-
level maintenance work.
8
Important!
Before you put the equipment into operation,
n
arrange for a specialist to check that the earthing,
protective multiple earthing or residual-current
operated circuit-breaker circuit comply with the
safety regulations of the power supply company
and work correctly.
The electrical plug-in connections must be
n
protected from wet conditions.
If there is a risk of flooding, place the plug-in
n
connections in an area which is safe from
flooding.
Strictly avoid pumping aggressive liquids and
n
abrasive substances.
Protect the equipment from frost.
n
Protect the equipment from dry running.
n
Take suitable measures to keep the equipment
n
out of the reach of children.
WARNING
Read all the safety regulations and instructions. Any
errors made in following the safety information and
the instructions set out below may result in an electric
shock, fire and/or serious injury.
Keep all safety information and instructions in a
safe place for future use.
2. Layout and items supplied (Fig. 1/2)
2.1 Layout
1. Motor
2. Suspension eyes
3. Pressure connection approx. 47.8 mm (G11/2)
female thread with integrated non-return valve
4. Dirt screen
5. Switchbox
6. Status indicator
7. Mains indicator
8. On/Off switch
9. Overload switch
10. Securing cable

2.2 Items supplied

Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are present.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, keep the packaging until the end of
n
the guarantee period.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

41.709.43

Table des Matières