Radio Operation - Sangean RCR-2 Mode D'emploi

DATE
Press DATE button, display DATE will blink. Press SET button,
display will blink year with a beep and a small Y (year) will appear,
1. Set the year with key + or -.
2. Press SET button again and follow the setting of year to set the
month and date .
3. Confirm DATE setting by pressing DATE button again.
Now the display will show time, date, week day, second and
symbol .
You can always adjust the time manually whenever is required by
following above procedures.

Radio operation

Turn on the radio with the Power on/off key 1.
Tune into desired stations
Manual station selection
1. With the key 15 Tuning + and -, you can tune into the frequency of
your desired stations.
2. Scanning tuning
Press and hold key 15 + or – for more than 0.5 seconds and
release, the radio will search for the next station.
GB
10