Radio Operation; Manual Station Selection; Automatic Station Selection - Sangean RCR-1 Mode D'emploi

DATE
Press DATE button , display DATE will blink. Press SET button,
display will blink year with a beep and a small Y (year) will appear,
1. Set the year with key + or - .
2. Press SET button again and follow the setting of year to set the
month and date.
3. Confirm DATE setting by pressing DATE button again.
Now the display will show time, date, week day, second and
symbol.
You can always adjust the time manually whenever is required by
following above procedures .

Radio operation

Turn on the radio with the Power on/off key 1.
Tune into desired stations

Manual station selection

1. With the key 18 Tuning + and - , you can tune into the frequency
of your desired stations

Automatic station selection

Press and hold key 18 + or – for more than 0.5 seconds and release,
the radio will search for the next station.
9