Environment - Festool HKC 55 EB Guide D'utilisation

WARNING
Protruding rotating saw blade
Risk of injury
Do not position hands near cutting area and saw

blade.
Do not place hands below the work piece.

Do not hold the workpiece in hand or place it on

your leg.
After cutting, switch off saw.

Pull back saw into initial position.

Remove cross cutting guide rail from work

piece.
not lay down! If the saw or the pendulum guard
does not retreat to initial position, interrupt sawing
process and check functionality, possibly remove
jammed woodchips.
laid down with the cross cutting guide rail.
Systainer
Many Festool products are shipped in a unique sys-
tem container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be inter-
locked together. They also can be interlocked atop
Festool CT dust extractors.
To open the Systainer
Turn the T-loc [11-1] to this position.
To lock the Systainer
Turn the T-loc [11-1] to this position.
Do not dispose of the device as domestic waste! Dispose of machines, accessories and packaging at an
environmentally responsible recycling centre. Observe the respective national regulations.
20
Warning! Danger
of injury!
blade exposed, do
Parking position - pendu-
lum guard closed! In park-
ing position the saw can be
To connect two Systainers
Place one Systainer on the top of the other (Fig.
[11A]).
Turn the T-loc [11-1] to one of this posi-
tions (Fig. [11 B]).
The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the
four latches of the previous Systainer.
Saw

Environment