Adjusting The Transmission Power; Configuring The Remoset Function; Adjusting The Volume; Activating / Deactivating The Key Lock - Monacor International JTS RU-8012DB/5 Mode D'emploi

5.2.4 Adjusting the transmission power

indication
Two settings are available for the transmission
power of the transmitter The lower transmission
power will result in a lower power consumption
and thus in a longer battery life; the transmission
range, however, will be shorter
To be selected with the button
transmission power of 50 mW
To be selected with the button
transmission power of 10 mW
Press the button SET to save the setting

5.2.5 Configuring the REMOSET function

The settings to be transferred by the function
to the transmitter can be defined
To be selected with the button
radio frequency (as adjusted on the
receiver unit), 20 dB attenuation (for
a pocket transmitter), audio sensitiv-
ity, automatic switch-off, transmis-
sion power
To be selected with the button
only radio frequency (as adjusted on
the receiver unit)
Press the button SET to save the setting

6 Adjusting the Volume

Use the button
the volume of a receiver unit: Press the button
repeatedly until the desired volume is indicated
:

The adjustment range is −31
ting: −10 dB) The volume adjustment mode will
:

be exited after 3 seconds if no button is pressed

7 Activating / Deactivating the Key Lock

The button
buttons
both receiver units With the key lock activated,
:

will be shown on the display when a
button is pressed
To activate the lock, keep the button
until
To deactivate the lock, keep the button
pressed until
:

play
or (3) to increase or reduce
 
Example:
Receiver unit 1 adjusted
to −6 dB
0 dB (factory set-
(6) can be used to lock the
(2), , and SET (3) of
 
is briefly shown on the display
is briefly shown on the dis-
pressed
17