Operation; Start-Up; Switching Off; Zeroing - KERN KFS-TM Notice D'utilisation Et D'installation

7 Operation

7.1 Start-up

 Press
, the appliance will carry out a self-test. As soon as the weight display
appears, the instrument will be ready to weigh.

7.2 Switching Off

 Press
, the display will disappear.

7.3 Zeroing

Resetting to zero corrects the influence of light soiling on the weighing plate.
Resetting range ± 2 % max.
 To unload the weighing system
 Press
, the zero display as well as the indicator [] next to a will appear.

7.4 Simple weighing

 Place goods to be weighed on balance.
 Wait for stability display [].
 Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding maximum loads is indicated by the display of "O-err", and an audio
sound. Unload weighing system or reduce preload.
KFS-TM-BA_IA-e-1613 21