Sound Guide Function - Alpine 3DA-7987 Mode D'emploi

1.#
2
1
2
D.A.P.
3
PWR
INTLZ
1.3
1
2
2
MONO
3
26
PWR
INTLZ
BEEP ON
1
BEEP OFF
2
PWR
INTLZ
ACT ON
ACT OFF
PWR
INTLZ
Basic Operation

Sound Guide Function

This function will give audible feedback with
varying tones depending upon the button
pressed.
Press and hold the PWR button for more than 3
seconds.
Press the Preset 1 button and the display
shows "BEEP ON."
Pressing the button again turns the Sound
Guide function off. "BEEP OFF" will be
displayed and no tones will be heard.
Press the PWR button to activate the normal
mode.
ACT Function
Touching the CD magazine during its eject or
disc change cycle can damage the mechanism.
To prevent this, a warning light and beep will
activate while the cycle is in progress. The
audible beep may be disabled leaving only the
warning light active.
Press and hold the PWR button for at least 3
seconds.
Press the Preset 2 button to select the ACT ON
or OFF mode.
Press the PWR button to activate the normal
mode.
English