Messages - Teac CD-RW890 Mode D'emploi

Messages

BLANK 0:00
A blank CD-R/CD-RW disc is set on the disc tray.
CLOSE
Closing the disc tray.
COMPLETE
Finalizing, unfinalizing, erasing, or refreshing is complete.
ERASE
Erase the last track of the CD-RW disc.
ERASE DISC
Erase all the tracks of the CD-RW disc.
FINALIZE
Finalize the disc.
FS 44_1K, FS 32K or FS 48K
The sampling frequency of the digital source
MONITOR
If no recordable disc has been inserted and you press the RECORD
button, "MONITOR" appears and you can monitor the sound of the
input source.
NO DISC
No readable disc has been loaded. Or the disc may be loaded up
side down.
NO TOC
An unfinalized CD-R/CD-RW disc is loaded.
OPEN
Open the tray.
- - - -:- -
The unit is reading the disc.
PMA WRITE
Writing the recorded memories on the disc.
(PMA: Program Memory Area)
READING
The unit is reading the disc.
REFRESH
Refresh the CD-RW disc.
UNFINALIZE
Unfinalize the CD-RW disc.
26
Messages
Error Messages
CANT COPY
The source disc has been digitally copied. Serial Copy Management
System prohibits the copying of digital copies.
COM ERROR
An error occurred in communications with the CD drive inside the
unit. Press the POWER button to turn the unit off, wait a minute,
and turn it on again.
DAO DISC
A CD-RW disc recorded in Disc At Once (DAO) format on a
computer or etc. is loaded. The unit cannot unfinalize such a disc.
DIN UNLOCK
A digital input source has been selected, but the source is not
connected or not turned on.
DISC ERROR
A disc (MP3, video CD, DVD, etc.) other than an audio CD has been
loaded. The unit cannot play such a disc.
DISC FULL
There is no space on the disc, or no more tracks can be recorded.
PGM FULL
32 tracks have been programmed. No more tracks can be
programmed.
READ ERROR
Something is wrong with the disc. Or the disc may be loaded up
side down.
REC ERROR
An error occurred during recording.
Press the POWER button to turn the unit off, wait a minute, and
turn it on again.
TRAY ERROR
An error occurred within the unit.
Press the POWER button to turn the unit off, wait a minute, and
turn it on again.