Accessories; Technical Specifications - Festo NPE Série Notice D'utilisation

NPE-...
6 Commissioning
If the emergency buffers in the end positions are used:
S
Check to see if the support of the emergency buffer is displaced or is damaged
asymmetrically.
If this is the case, the support KYP must be positioned again.
When doing this, make sure that you tighten the clamping screws again.
S
Pull gently on the adhesive connection between the emergency buffer and the
support.
If the adhesive layer or the emergency buffer is damaged, you must replace the
emergency buffer completely.
7

Accessories

Shock absorber support type KYP-...
8

Technical specifications

Type
Permitted ambient temperature
Permitted impact energy without
locking sleeve
Permitted impact energy with
locking sleeve
Paint-wetting substances criteria
Cover foil of adhesive tape
Emergency buffer when cover foil
is removed
Materials
Cushioning unit
Cover foil
Adhesive layer
14
NPE-18 NPE-25 NPE-40
- 10 ... + 60 °C
0.5 J 1.3 J 13 J
2 J 25 J 60 J
Contains paint-wetting substances
Free of paint-wetting substances
PU (Polyurethene foam)
PP foil or paper, silicon-coated
Acrylate on PET foil
Festo NPE-... 0102NH English
NPE-63
74 J
200 J