OEG e-Peilstab plus Manuel D'utilisation page 6

6
Manual
Dear customer
Thank you for choosing the e-Dipstick plus for fuel oil.
It allows you to continuously check the content of a tank.
General notes
Without obtaining prior permission of the manufacturer, no alterations, attachments or con-
versions to the product may be conducted. In respect of alterations without the prior permis-
sion of the manufacturer being obtained, we cannot accept any liability and the warranty will
lapse. Tank modifications must be carried out by certified specialists. For a smooth operation,
it is necessary to use original equipment only.
Application
The e-Dipstick plus is a level gauging device. It can be used for all forms of tanks, casks or ci-
sterns. The e-Dipstick plus is unsuitable and not approved for the use in potentially explosive
areas.
Note: To use e-Dipstick plus with liquids other than fuel oil, please contact the manufacturer/
distributor.
Scope of delivery: (Annex A)
Commissioning
1. Place measuring tube into the tank (Annex B).
2. Fix e-Dipstick plus with the three rear adhesive dots above maximum filling level. Use wall
plugs and screws optionally (Annex C).
3. Connect e-Dipstick plus hose with measuring tube.
Setting of e-dipstick plus
1. Choice of tank type
Keep the button pressed until acknowledgement signal (vibration) sets in.
The word "Tank" appears.
Short pressing: Choice of tank type ("Cubic", "Cylindrical" or "Spherical")
Long pressing: Tank type is saved (vibration). Display jumps into cm-indication.
GB e-Dipstick plus