Standard Accessories; Optional Accessories (Sold Separately); Prior To Operation; Applications - Hitachi W 6V3 Mode D'emploi

English

STANDARD ACCESSORIES

(1) No. 2 Plus bit ....................................... 1 (W6V3, W6VA3)
(2) Magnetic hex socket (H= 10 mm) .... 1 (W6VB2, W8VB)
(3) Hook ..................................................................................... 1
Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

1. For hex-head screws
Hex-socket
Magnetic type
H = 6.35 mm
H = 7.94 mm
H = 9.53 mm
H = 10 mm
2. For other screws
Screw
Bit type
head
3. Plastic case
Optional accessories are subject to change without
notice.

APPLICATIONS

Tightening hex-head screws
Tightening drywall screws, wood screws and self-
drilling screws.
4
Non magnetic type
H = 6.35 mm
H = 7.94 mm
H = 9.53 mm
H = 10 mm
No.1
No.2
No.3
No.1
Magnetic bit holder
No.2
(Short type)
No.1
No.2
No.3
No.1
Magnetic bit holder
No.2
B Size
4 mm
5 mm
Non-magnetic bit bolder
4. Hook
Sub-Stopper (B)
H 1/4
H 5/16
H 3/8
Bit holder

PRIOR TO OPERATION

1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the
power switch is in the ON position, the power tool
will start operating immediately, inviting serious
accident.
3. Extension cord
When the work area is removed from the power
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be
kept as short as practicable.
Sub-Stopper
Sub-Stopper (A)
Sub-Stopper (C)