Product Description - VOLTCRAFT LSG-4 Mode D'emploi

10 MAX button; records the maximum value in the voltage measuring range.
11 Battery compartment on the rear
12 Removable protective rubber frame with setup brackets on the rear
13 "Cont" duty switch for continuity testing with cable detector
14 Banana clip measuring leads for cable detector and status test (red = Lb, black = La)
15 Modular connector for cable detector and status test
16 Headphone socket for 3.5 mm jack plug
17 Integrated loudspeaker
18 Battery compartment on the rear
19 Button for loudspeaker playback during cable tracking (depressed = loudspeaker on)
20 Rotary duty switch with volume control for tracking signal (0 = off, 1 = low, 9 = high)
21 Insulated test prod for cable tracking

7. Product description

The multimeter (referred to as DMM in the following) indicates measured values on the digital display together with the
units and symbols. The measuring value display of the DMM comprises 2000 counts (count = smallest display value).
If the DMM is not operated for approx. 15 minutes, it turns itself off automatically. This saves the batteries and ensures
longer operating time.
Cables are detected via a coupled acoustic signal that can be traced touchless with the receiver. A set of headphones
can be connected to the receiver and the volume is adjustable.
The line status (right/wrong polarity and ring tone) of the telephone lines are displayed on a separate LED display and
works independent of the DMM.
The measuring device can be used for do-it-yourself or for professional applications.
For better readability, the DMM can also be mounted with the clip on the rear.
Rotary switch (4) on the multimeter
The individual measuring functions are selected via a rotary switch.
The automatic range selection "auto range" is active in all measuring ranges. The
appropriate range of measurement is set for each application individually.
The measuring function diode test and continuity test have dual assignments.
These functions are switched with the button "MODE" (6).
If the rotary switch is set to "OFF", the measuring device is switched off. Always turn
the measuring device off when it is not in use.
30