Combustion Airflow Settings; Use; Controls For Use And Settings; Performance Regulator - Wamsler W1-75 Instructions De Montage Et D'utilisation

2.2

Combustion airflow settings

The settings must always be as shown.
Fuel
Lighting
Firewood
Lignite briquettes
Lignite briquettes
Not in use: do not add any more
fuel
Table 2
3.

Use

3.1

Controls for use and settings

3.1.1

Performance Regulator

The rate of combustion and therefore the heat delivered by the stove are determined by
the amount of air for combustion air flowing under the grid. This primary air supply is set
using the performance regulator control.
2
1
3.1.2

Secondary air control / Airlogic

airflow set-
Nominal heat
load
Nominal heat
load
Long-term
heating
1 - Closed
2 - Firewood
3 - Lignite
3
The secondary air regulator is on the inside of the frame, behind
the fire door. Choose the setting for the fuel.
1 - Firewood
2 - Lignite
Primary
Start damper
setting
ting
41
Secondary air-
flow setting
2
1
1
1
1
or
Combus-
tion dura-
tion in hrs
-
approx. 1
approx. 3
approx. 12
-