Hema 80.06.0009 Mode D'emploi page 13

PARTS DESCRIPTION
1. Main body (Fan guard + Fan blade)
2. Tube stand
3. On/off switch
4. USB plug
OPERATING INSTRUCTIONS:
1. Ensure on/off switch is set to position "O".
2. Insert USB plug into USB port of the computer or other USB port. Be sure it fits tightly.
Note: the appliance can be connected to the USB port of AC/DC converter (DC 5V, 1A).
3. The fan is switched on by pressing the on/off switch to position "I".
4. After use, press the switch to Position "O".
5. Tilting Angles: turn off the fan, then push or pull the guards to adjust the angle of airflow.
Note: To prevent overloading a USB port, do not plug the fan into a USB port that is servicing other
electrical needs.
CLEANING AND STORAGE
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the
appliance.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe
it down with a damp cloth and then dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it
occasionally using a dry brush or vacuum cleaner.
4. Pack the appliance in its original box and place it in a dry, well-ventilated place when it is not to be
used for a long period of time.
Environment
In compliance with the directives on Waste Electrical and Electronic Equipment, this product must not
be discarded with domestic waste but should be disposed of separately for recycling. If you wish to
dispose of this product in the future, do NOT throw it away with the household rubbish but hand it in
at a specially designated place, such as your municipal domestic chemical waste depot.
Quality
Safety and quality is very important to HEMA. We have our own laboratory, which assesses all
equipment in terms of electrical safety and ease of use, before it is included in our range. HEMA also
monitors the product quality in collaboration with the manufacturer.
Security
This HEMA item may be fitted with a plastic anti-theft strip. You will find the strip on the bottom of the
product. This strip does not influence the quality or the operation of the product and can be removed
without a problem.
- 12 -