Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DECLARATION OF A STANDARDS CONFORMITY
DECLARATION OF A STANDARDS CONFORMITY
DECLARATION OF A STANDARDS CONFORMITY
The producer confi rms that the devices agree with 2004/108/ES, 2006/95/ES standards, rule nr. 616/2006
sb., 17/2003 sb. and with relevant goverment orders. Instalation must be done with respect to valid standards.
The producer confi rms that the devices agree with 2004/108/ES, 2006/95/ES standards, rule nr. 616/2006
Attention, the producer refuses any responsibility in case of direct or indirect damages which are caused due
sb., 17/2003 sb. and with relevant goverment orders. Instalation must be done with respect to valid standards.
to wrong instalation, incorrect intervention or modifi cation, insuffi cient maintenance, incorrect use and also
Attention, the producer refuses any responsibility in case of direct or indirect damages which are caused due
possibly caused by other reasons presented by items in sale conditions. This appliance is set only for skilled
to wrong instalation, incorrect intervention or modifi cation, insuffi cient maintenance, incorrect use and also
use and must be operated by qualifi ed persons only. Parts set and secured by the producer or accredited
possibly caused by other reasons presented by items in sale conditions. This appliance is set only for skilled
person must not be rebuilt by user.
use and must be operated by qualifi ed persons only. Parts set and secured by the producer or accredited
person must not be rebuilt by user.
TECHNICAL DATA
TECHNICAL DATA
TECHNICAL DATA
Label with technical data is placed on the back side of the device. Study the electrical diagram of connection
and all following information before instalation.
Label with technical data is placed on the back side of the device. Study the electrical diagram of connection
and all following information before instalation.
MODEL
SPLT-780-11 E
SPLT-780-21 E
SPLT-7120-21 E
PACKING AND DEVICE CHECK
PACKING AND DEVICE CHECK
The device leaves our stocks properly packed with appropriate symbols and labels. There are also appropriate
instructions for use. In case the packing shows bad handling or damage, it must be reclaimed at transporter
immediately by writing and signing of a damage protocol.
Important notice:
• only for proff esional use
• this instructing guide must be read properly and carefully because it contains important information about
safety elements, installation, use
• these recommendations refer to this product
• this product corresponds with valid standards
• this guide must be properly deposited for future use
• keep the children away from manipulation with the product
• when selling or moving the product to another place it is necessary top make yourself sure that the staff
or the professional service has got acquainted with control and installation instructions from enclosed guide
• only authorised person can operate the product
• it can not be switched on without supervision
• we recommend to have the product checked by professional service min. once a year
• only original spare parts can be used for repairs
• the product can not be cleaned by the water jet or pressure shower
• by damage or break down disconnect all the feeders (water, gas, electricity) and call professional service
• producer refuses any responsibility in case of damages caused by wrong installation, by disobserving of
above mentioned recommendations or by other use etc.
VOLTAGE
WATTAGE
(V/HZ)
(kW)
400/3N/50
15,13
400/3N/50
18,3
400/3N/50
24,3
3
OVEN
HOTPLATES
(kW)
4 x 3 kW
3,13
4 x 3 kW
6,3
6 x 3 kW
6,3
DIMENSIONS
(cm)
80x73x90 h
80x73x90 h
120x73x90 h
Publicité
Table des Matières
