Cleaning; Microphone; Wind Screen - Harman AKG C414 XLS Mode D'emploi

cLEANINg

5 Cleaning
5.1

Microphone

Use a soft cloth moistened with water to clean the surface of the microphone body.
5.2

Wind screen

Wash the foam wind screen in soap suds. Do not use the wind screen before it has dried
completely.
46 C414 XLS / C414 XLII MANUAL
6 Technical data
Type: 1‑inch large diaphragm pressure gradient microphone
Palar patterns: 9, selectable
Open‑circuit sensitivity: 23 mV/Pa (-33 dBV ± 0.5 dB)
Frequency range: 20 to 20,000 Hz (see frequency response graphs)
Impedance: ≤ 200 ohms
Recommended load impedance: ≥2200 ohms
Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Preattenuation Pads: -6 dB, -12 dB, -18 dB (selectable)
Equivalent noise level to IEC 60268-4: 20 dB (0 dB preattenuation)
Equivalent noise level to IEC 60268-4 6 dB(A) (0 dB preattenuation)
(A‑weighted):
Signal/noise ratio re 1 Pa (A-weighted): 88 dB
Max. SPL for 0.5% THD: 200/400/800/1600 Pa
140/146/152/158 dB SPL
(0/-6/-12/-18 dB preattenuation)
Dynamic range (A-weighted): 134 dB min.
Max. output level (A-weighted): 5 V rms (+14 dBV) (+14 dBV)
Environment: temperature: ‑10°C to +60°C
R. H.: 95% (+20°C), 85% (+60°C)
Powering: 48 V phantom power to IEC 61938
Current consumption: approx. 4.5 mA
Connector: IEC standard 3‑pin XLR
Dimensions: 50 x 38 x 160 mm / 2.1 x 1.7 x 6.3 in.
Net weight: 300 g / 10.2 oz.
Patents: Electrostatic transducer (patents nos. AT 395.225, DE 4.103.784,
JP 2.815.488, US 7,356,151)
This product conforms to the standards listed in the Declaration of Conformity. You can request the Declaration of Conformity
by e‑mail from sales@akg.com.
C414 XLS / C414 XLII MANUAL
TEcHNIcAL dATA
47